Cit:Nunes.etal:2021

Aus Salzwiki
Version vom 25. April 2023, 14:44 Uhr von LTemplin (Diskussion | Beiträge)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springen Zur Suche springen
Autor Nunes, C.; Godts, S.; Aguilar Sanchez, A.M.; Slížková, Z.; Lubelli, B.
Jahr 2021
Titel Towards a new salt crystallisation test: comparison of salt contamination procedures
Bibtex @inproceedings { Nunes.etal:2021,

title = {Towards a new salt crystallisation test: comparison of salt contamination procedures }, booktitle = {Proceedings of SWBSS 2021 – Fifth International Conference on Salt Weathering of Buildings and Stone Sculptures}, year = {2021}, editor = {Lubelli, B.; Kamat, A.A.; Quist, W.J.}, pages = {69-77}, publisher = {TU Delft Open}, note = {The RILEM TC 271-ASC is currently developing a new ageing test to assess the resistance of porous building materials to salt crystallisation. The new test consists of two phases: salt accumulation and damage propagation. This paper focuses on the salt accumulation phase; this phase should promote salt crystallisation close to the evaporative surface of the substrates (common situation onsite) without leading to salt efflorescence or damage. Damage should take place in the propagation phase, which is not add ressed in this paper. This work compares the effectiveness of three contamination procedures for salt accumulation: P1) salt contamination by capillary absorption of salt solution, followed by drying; P2) continuous capillary absorption of salt solution; P3) placement of salt crystals on the surface of the materials followed by the conditioning of the specimens at high relative humidity until complete dissolution of the salts. The results of P1 and P2 procedures presented in this paper are detailed in a sep arate publication, while this paper focuses on P3 procedure and compares the results. The effectiveness of each procedure has been evaluated by assessing the salt distribution in the specimen using ion chromatography and scanning electron microscopy. The r esults show that P3 is technically the least complicated to set up and does not entail the risk of development of salt efflorescence or damage. However, it can lead to salt migration within the specimens to a greater depth, hence future research is proposed to counteract this effect.}, key = {SWBSS 2021}, url = {https://predict.kikirpa.be/wp-content/uploads/2021/12/SWBSS2021_Procedings.pdf }, author = {Nunes, C. and Godts, S. and Aguilar Sanchez, A.M. and Slížková, Z. and Lubelli, B.} }

DOI
Link
Bemerkungen in: Lubelli, B.; Kamat, A.A.; Quist, W.J. (Hrsg.): Proceedings of SWBSS 2021 – Fifth International Conference on Salt Weathering of Buildings and Stone Sculptures,TU Delft Open 69-77


Eintrag in der Bibliographie

[Nunes.etal:2021]Nunes, C.; Godts, S.; Aguilar Sanchez, A.M.; Slížková, Z.; Lubelli, B. (2021): Towards a new salt crystallisation test: comparison of salt contamination procedures . In: Lubelli, B.; Kamat, A.A.; Quist, W.J. (Hrsg.): Proceedings of SWBSS 2021 – Fifth International Conference on Salt Weathering of Buildings and Stone Sculptures,TU Delft Open 69-77, Webadresse.Link zu Google Scholar

Keywords[Bearbeiten]

Crystallisation test, porous materials, salt accumulation, evaporative surface

Abstract[Bearbeiten]

The RILEM TC 271-ASC is currently developing a new ageing test to assess the resistance of porous building materials to salt crystallisation. The new test consists of two phases: salt accumulation and damage propagation. This paper focuses on the salt accumulation phase; this phase should promote salt crystallisation close to the evaporative surface of the substrates (common situation onsite) without leading to salt efflorescence or damage. Damage should take place in the propagation phase, which is not add ressed in this paper. This work compares the effectiveness of three contamination procedures for salt accumulation: P1) salt contamination by capillary absorption of salt solution, followed by drying; P2) continuous capillary absorption of salt solution; P3) placement of salt crystals on the surface of the materials followed by the conditioning of the specimens at high relative humidity until complete dissolution of the salts. The results of P1 and P2 procedures presented in this paper are detailed in a sep arate publication, while this paper focuses on P3 procedure and compares the results. The effectiveness of each procedure has been evaluated by assessing the salt distribution in the specimen using ion chromatography and scanning electron microscopy. The r esults show that P3 is technically the least complicated to set up and does not entail the risk of development of salt efflorescence or damage. However, it can lead to salt migration within the specimens to a greater depth, hence future research is proposed to counteract this effect.